SENCO 4G0001N FinishPro42XP, 15 Gauge 2-1/2-in Oil-Free Angled Finish Nailer (Xtreme Pro)
| Retail Price: | $239.99 |
| CPO Price: | $219.99 |
| Sale Price: | $179.99 |
| Savings: | $60.00 (25%) |
You May Also Like These...
- Thumb wheel depth-of-drive
- Stretch comfort grip
- Two no-mar pads with onboard storage to protect work materials
- NeverLube design means oil-less operation
- Magnesium housing is lightweight and comfortable to use all day
- EZ-Clear latch provides quick and easy clearing of occasional jams
- 360 Degrees adjustable exhaust
- Construction ruler for quick measurements
- FinishPro42XP, 15 Gauge 2-1/2-in Oil-Free Angled Finish Nailer (Xtreme Pro) - 4G0001N
- Case
| Fastener Gauge: | 15 |
| Operating Range: | 70 - 120 PSI |
| Fastener Length: | 1-1/4-in - 2-1/2-in |
| Fastener Type: | Finish Nails |
| Fastener Collation: | Adhesive Collated |
| Fastener Capacity: | 104 |
| Firing Mode: | Sequential Actuation |
| Magazine Type: | Bottom Loading |
| Magazine Angle: | 34 Degrees |
| Depth of Drive: | Adjustable |
| Jam Clearing: | Tool-Free Latch |
| Tip: | No-mar |
| Maintenance: | Oil-Free |
| Fitting Type: | 1/4-in NPT |
| Weight: | 4 lbs. |
| Height: | 11-5/8-in |
| Length: | 13-in |
| Width: | 3-1/2-in |
| Handle: | Comfort Grip |
| Air Consumption: | 3.87 SCFM |
| Power Source: | Air Compressor |
| Dry Fire Lockout: | No |
| Baseboard |
| Cabinets |
| Case goods |
| Caskets |
| Chair rail |
| Decorative trim |
| Door and window casing |
| Furniture trim |
| Paneling |
| Finish and trim |
Limited Warranty SENCO® Pneumatic, DuraSpin®, Cordless Tools & Compressors
Senco Products, Inc. ("SENCO") designs and constructs its products using the highest standards of material and workmanship. SENCO warrants to the original retail purchaser that the following products will be free from defects in material or workmanship for the warranty period specified below:
|
|
|
During the warranty period (which begins on the purchase date), SENCO will repair or replace, at SENCO's option and expense, any product or part that is defective in materials or workmanship after examination by a SENCO Authorized Warranty Service Center, subject to the exceptions, exclusions and limitations described below. Any replacement product or part will carry a warranty for the balance of the warranty period applicable to the replaced product or part. A DATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL PURCHASER IS REQUIRED TO MAKE A WARRANTY CLAIM. Product registration can be accomplished through on-line Product Registration at www.senco.com or by completing and returning the postage paid product registration form included with your Operator's manual/parts chart information, found inside the product carton. To make a warranty claim, you must return the product, with proper receipt/proof of purchase and return transportation charges prepaid, to a SENCO Authorized Warranty Service Center. A list of SENCO Authorized Warranty Service Centers can be found at www.senco.com or by calling 1-800-543-4596 toll free. SENCO will perform its obligations under this warranty, within a reasonable time after approval of the warranty claim.
Wheelbarrow Compressors:
- Subject to the exceptions, exclusions and limitations described below, SENCO warrants that the compressor pump will be free from defects in materials and workmanship for two years after the purchase date.
- Defective parts of the compressor pump not subject to normal wear and tear will be repaired or replaced, at SENCO's option, during the two year warranty period. If SENCO determines that repair or replacement is not feasible, SENCO will refund the purchase price less reasonable depreciation based on actual use.
SENCO Cordless:
- Subject to the exceptions, exclusions and limitations described below, SENCO warrants that the SENCO Cordless tool will be free from defects in materials and workmanship for two years after the purchase date.
- Subject to the exceptions, exclusions and limitations described below, SENCO warrants that the batteries and chargers used with SENCO Cordless tools will be free from defects in material and workmanship for one year after the purchase date.
WARRANTY EXCLUSIONS
The following warranty exclusions apply:
- Normal wear parts are not covered under this warranty. Normal wear parts include, for example, isolators, drive belts, air filters, rubber o-rings, seals, driver blades, piston stops, piston/driver assembly, and fuel stems.
- This warranty does not cover parts damaged due to normal wear, misapplication, misuse, accidents, operation at other than recommended speeds or voltage (electric units only), improper storage, or damage resulting during shipping.
- Products used in production/industrial applications as defined by SENCO are excluded from this warranty.
- Labor charges or loss or damage resulting from improper operation, maintenance or repairs are not covered by this warranty.
- SENCO does not warrant the Wheelbarrow Compressor Engine/Motor, but the Compressor Engine/Motor may be covered under a warranty offered by its manufacturer.
GENERAL WARRANTY CONDITIONS
This warranty will be honored, only if:
- Clean, dry, regulated compressed air has been used, at air pressure not exceeding the maximum indicated on the tool casting;
- No evidence of abuse, abnormal conditions, accident, neglect, misuse or improper modifications or storage of the product; and
- No Deviation from operating instructions, specifications, and maintenance schedules exists (read Operator Manual for use, specifications, and maintenance instructions).
THIS WARRANTY IS THE ONLY WARRANTY ON THE PRODUCT, AND SENCO DISCLAIMS ALL OTHER WARRANTIES. ANY IMPLIED WARRANTIES WILL BE LIMITED IN DURATION TO THE APPLICABLE WARRANTY PERIOD SPECIFIED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOUR REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE. SENCO SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL SENCO'S LIABILITY EXCEED THE PRICE OF THE PRODUCT WHICH HAS GIVEN RISE TO THE CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE. NO EMPLOYEE OR REPRESENTATIVE OF SENCO OR ANY DISTRIBUTOR OR DEALER IS AUTHORIZED TO MAKE ANY CHANGE OR MODIFICATION TO THIS WARRANTY.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
REPLACEMENT OF TOOL DUE TO NATURAL DISASTER
SENCO will replace any tool destroyed by an Act of God such as flood, earthquake, hurricane or other disaster resulting only from the forces of nature. Such a claim will be honored provided that such original retail purchaser had previously submitted a completed warranty registration card for the tool, and then submits proof of ownership and an acceptable statement describing such Act of God documented by an insurance carrier, police department, or other official governmental source. To obtain instructions for filing a claim call 1-800-543-4596.
CUSTOMER SATISFACTION
One hundred percent customer satisfaction is our #1 goal. If for any reason the product does not perform to the original purchaser's satisfaction, it can be returned to the place of purchase within thirty days with dated sales receipt for a full refund of the purchase price.
TYREX TOOLS AND PARTS WARRANTY:
The length of this guarantee is one year from date of purchase by the original retail purchaser. During this period, DuraSpin Products, LLC, will repair or replace at DuraSpin's option, any original part or parts for the original retail purchaser. This will be done free of charge, provided the parts are determined defective in materials or workmanship upon examination by a DuraSpin Authorized Warranty Service Center (exception: rubber o-rings, seals and bits). Any replacement part provided will carry a warranty for the balance of the period of warranty applicable to the part it replaces.
TYREX CONCRETE TOOLS AND PARTS WARRANTY:
The length of this guarantee is two years from date of purchase by the original retail purchaser. During this period, Rex Commercial Tools and Fasteners, LLC, will repair or replace at Rex's option, any original part or parts for the original retail purchaser. This will be done free of charge, provided the parts are determined defective in materials or workmanship upon examination by a TyRex Authorized Warranty Service Center (exception: batteries). Any replacement part provided will carry a warranty for the balance of the period of warranty applicable to the part it replaces.
This warranty will be honored, only if:
A) No evidence of abuse, or failure to follow recommended operational maintenance, or modification of the tool is present
(read Operator Manual for use and maintenance instructions);
B) When repair or replacement of parts or tools is necessary, the original retail purchaser returns the complete tool or part,
with transportation prepaid, to the nearest DuraSpin Products, LLC Authorized Warranty Service Center, with purchase receipt or
other positive proof that the part or tool is within the warranty period.
THIS WARRANTY IS THE ONLY WARRANTY ON THIS TOOL, AND ALL OTHER WARRANTIES, WHETHER ORAL, WRITTEN, EXPRESS, OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED. BUYER'S OR USER'S REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE. DuraSpin Products, LLC SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL DURASPIN'S LIABILITY EXCEED THE PRICE OF THE TOOL WHICH HAS GIVEN RISE TO THE CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS TOOL SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE.
Replacement of Tool Due to Natural Disaster
DuraSpin Products, LLC will also replace any tool destroyed by an Act of God such as flood,earthquake, hurricane or other disaster resulting only from the forces of nature. Such a claim will be honored provided that such original retail purchaser had previously submitted a completed warranty registration card, and then submits proof of ownership and an acceptable statement describing such Act of God documented by an insurance carrier, police department, or other official governmental source. To obtain instructions for filing a claim call 1-800-396-3318. DuraSpin Products, LLC CINCINNATI, OHIO 45245-1213 USA
Product Reviews
REVIEW SNAPSHOT®
by PowerReviews(based on 6 reviews)
100%
of respondents would recommend this to a friend.
Pros
- Good grip (5)
- Good power output (5)
- Easy to use (4)
- Good safety features (4)
- Easy to store (3)
Cons
Best Uses
- In the field (6)
- Home repair (3)
- In the workshop (3)
- Reviewer Profile:
- Professional (6)
REVIEWS
Reviewed by 6 customers
Sort by
Displaying reviews 1-6
FinishPro 42XP, 2-1/2-in 15-Gauge Finish
Pros
- Easy To Use
- Good Grip
- Good Safety Features
- Powerful
Cons
- None
Best Uses
- Home Repair
- In The Field
- In The Workshop
Comments about SENCO FinishPro 42XP, 2-1/2-in 15-Gauge Finish Nailer (Xtreme Pro):
Great gun for the price.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
i would buy your product from now on
Pros
- Easy To Store
- Easy To Use
- Good Grip
- Good Safety Features
- Powerful
Cons
Best Uses
- In The Field
- In The Workshop
Comments about SENCO FinishPro 42XP, 2-1/2-in 15-Gauge Finish Nailer (Xtreme Pro):
every thing is great
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
(1 of 2 customers found this review helpful)
great gun NO CASE??!
Pros
- Very smooth
Cons
- No case
Best Uses
- In The Field
Comments about SENCO FinishPro 42XP, 2-1/2-in 15-Gauge Finish Nailer (Xtreme Pro):
smoothest gun I have ever used. I had a hitatchi that was great, compact and very powerful. but loud. The senco is a little bulkier but much smoother. plus no oil, cant beat that
Bottom Line Yes, I would recommend this to a friend
(1 of 2 customers found this review helpful)
Was this review helpful? Yes / No
- You may also flag this review
(1 of 1 customers found this review helpful)
best bang for the buck
Pros
- Good Grip
- Powerful
Cons
Best Uses
- In The Field
Comments about SENCO FinishPro 42XP, 2-1/2-in 15-Gauge Finish Nailer (Xtreme Pro):
this is a great nailer, but don't tighten the air fitting past snug or your going to crack the housing
Bottom Line Yes, I would recommend this to a friend
(1 of 1 customers found this review helpful)
Was this review helpful? Yes / No
- You may also flag this review
(1 of 1 customers found this review helpful)
GREAT GUN. Just like the old version,
Pros
- Easy To Store
- Easy To Use
- Good Grip
- Good Safety Features
- Powerful
Cons
Best Uses
- Home Repair
- In The Field
- In The Workshop
Comments about SENCO FinishPro 42XP, 2-1/2-in 15-Gauge Finish Nailer (Xtreme Pro):
great gun
Bottom Line Yes, I would recommend this to a friend
(1 of 1 customers found this review helpful)
Was this review helpful? Yes / No
- You may also flag this review
(1 of 1 customers found this review helpful)
It doesn't get any better!
Pros
- Easy To Store
- Easy To Use
- Good Grip
- Good Safety Features
- Powerful
Cons
- Heavy
Best Uses
- Home Repair
- In The Field
Comments about SENCO FinishPro 42XP, 2-1/2-in 15-Gauge Finish Nailer (Xtreme Pro):
Well balanced, solidly built, with power to "send 'em home" thru hard wood. If you buy new, you will pay too much.
Bottom Line Yes, I would recommend this to a friend
(1 of 1 customers found this review helpful)
Was this review helpful? Yes / No
- You may also flag this review
Displaying reviews 1-6

