|Air Consumption at 90 PSI - SCFM:||4.4|
|Air Inlet Size:||1/4 in.|
|Drive System:||Direct Drive|
|Noise Rating - dBA:||79|
|Operating Pressure - PSI:||125|
|Pump Speed - RPM:||3,400|
|Pump Type:||Cast Iron|
|Tank Capacity:||4.3 gal.|
|Tank Style:||Twin Stack|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Is this compressor strong enough to run the Senco 325FRHXP Framing Nailer? At 5.2 cfm for the nailer, it seems like this compressor is going to be inadequate.
A:No, this compressor would not be sufficient for the Senco nailer, model 325FRHXP
Q:How much oil does it take? It will not run in cold temperatures and I read that changing to 5-30 works well .
A:For technical assistance, please contact Senco directly at 800.543.4596
Q:will it support 2 siding coil nailers ?
A:At 4.4 SCFM two coil nailers are going to push this compressor pretty hard. It will be compressing air fairly often to keep up with the flow.
Q:Where is it made ?
A:Compressor says made in china
A:Senco products are made in the USA.
Q:What kind of oil goes in it
A:Senco has a model PC0344 compressor oil for this compressor.
Q:Where is the manual overload switch and how do you reset it ?
A:Please see the below link for troubleshooting assistance on the Senco model PC1131.
A:Please see the below link for troubleshooting assistance on the Senco model PC1131. http://www.senco.com/Documents/Manuals/PC1131_MAN.pdf
Q:will it run my impact wrench ,, mount tires ,personal use
A:Yes, as long as your impact wrench isn't rated over 125 PSI.
Q:will it run impact tools?
A:This compressor is recommended for framing and sheathing, decking, roofing and finish and trim.
A:The compressor is rated at 4.4 SCFM @ 90 PSI. Common SCFM impact tool requirements indicate that it will not run most impact tools. The air requirements are typically:
Q:how loud is this compressor, the db rating
A:The rating of this product is 79 dbs.
A:The decibel rating for the compressor is 79 db.
|Includes:||PC1131, 4.3 Gallon Electric Oil-Lube Compressor - PC1131,
1/4 in. Universal Coupler,
|PC1131, 4.3 Gallon Electric Oil-Lube Compressor - PC1131R,
1/4 in. Universal Coupler
|Availability:||In Stock||In Stock|
|Warranty:||1 Year Limited||1 Year Limited|
|You Save:||N/A||$45.00 (21%)|
Senco Products, Inc. ("SENCO") designs and constructs its products using the highest standards of material and workmanship. SENCO warrants to the original retail purchaser that the following products will be free from defects in material or workmanship for the warranty period specified below:
During the warranty period (which begins on the purchase date), SENCO will repair or replace, at SENCO's option and expense, any product or part that is defective in materials or workmanship after examination by a SENCO Authorized Warranty Service Center, subject to the exceptions, exclusions and limitations described below. Any replacement product or part will carry a warranty for the balance of the warranty period applicable to the replaced product or part. A DATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL PURCHASER IS REQUIRED TO MAKE A WARRANTY CLAIM. Product registration can be accomplished through on-line Product Registration at www.senco.com or by completing and returning the postage paid product registration form included with your Operator's manual/parts chart information, found inside the product carton. To make a warranty claim, you must return the product, with proper receipt/proof of purchase and return transportation charges prepaid, to a SENCO Authorized Warranty Service Center. A list of SENCO Authorized Warranty Service Centers can be found at www.senco.com or by calling 1-800-543-4596 toll free. SENCO will perform its obligations under this warranty, within a reasonable time after approval of the warranty claim.
The following warranty exclusions apply:
This warranty will be honored, only if:
THIS WARRANTY IS THE ONLY WARRANTY ON THE PRODUCT, AND SENCO DISCLAIMS ALL OTHER WARRANTIES. ANY IMPLIED WARRANTIES WILL BE LIMITED IN DURATION TO THE APPLICABLE WARRANTY PERIOD SPECIFIED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOUR REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE. SENCO SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL SENCO'S LIABILITY EXCEED THE PRICE OF THE PRODUCT WHICH HAS GIVEN RISE TO THE CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE. NO EMPLOYEE OR REPRESENTATIVE OF SENCO OR ANY DISTRIBUTOR OR DEALER IS AUTHORIZED TO MAKE ANY CHANGE OR MODIFICATION TO THIS WARRANTY.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
SENCO will replace any tool destroyed by an Act of God such as flood, earthquake, hurricane or other disaster resulting only from the forces of nature. Such a claim will be honored provided that such original retail purchaser had previously submitted a completed warranty registration card for the tool, and then submits proof of ownership and an acceptable statement describing such Act of God documented by an insurance carrier, police department, or other official governmental source. To obtain instructions for filing a claim call 1-800-543-4596.
One hundred percent customer satisfaction is our #1 goal. If for any reason the product does not perform to the original purchaser's satisfaction, it can be returned to the place of purchase within thirty days with dated sales receipt for a full refund of the purchase price.